Baby Control Digital Breath Monitor Baby Control BC-2210, with 1x2 sensor pads

What it is for.
During the first year of life, a child may experience irregular breathing or even respiratory arrest. These symptoms can be a symptom of a cold, high fever or other medical condition. In an extreme case, however, it can be related to SIDS (sudden infant death syndrome), which is still the most common cause of death in infants under 1 year of age. It is a monitoring device that can help parents overcome the danger of breathing difficulties.
Certified tool.
Clinically tested Baby Control Digital breathing monitor It bears the CE 1011 mark as a medical device. It thus meets all European requirements for safety, health safety and environmental protection that apply to the product.
Respiratory control.
The Baby Control Digital breathing monitor continuously monitors the breathing of a child lying in a crib, cradle, stroller, etc. A sensor pad placed directly on the grid under the mattress detects the child's breathing movements, then transmits the information to the control unit, which evaluates the measured values. The Baby Control digital breathing monitor detects possible respiratory arrest. In case of a dangerous situation, i.e. if the value of the baby's breathing movements is below the set detection threshold level for more than 12 seconds (see Setting the detection threshold level), the Baby Control Digital Breath Monitor will sound a loud alarm. However, the Baby Control Digital breath monitor cannot intervene in any dangerous situation.
Respiratory sensing.
Detection is performed through the mattress. The Baby Control Digital breathing monitor is not in direct contact with the baby. The uniquely large monitoring area of ​​the sensor pad is 300×500 mm. Depending on the type, the Baby Control Digital breath monitors have one, two, three or four (type for twins) sensor pads. The Baby Control Digital breath monitor with three sensor pads is able to monitor the surface of most cots. Concerns about the baby moving out of the sensing area can be reduced by using the type with multiple sensor pads.
Variable placement of sensor pads.
You can also place the sensor pads on the baby's temporary bed, to which you only need to transfer the control unit.
Excellent sensitivity in the lateral direction.
If the baby is not lying exactly on the sensor pad, the Baby Control Digital breath monitor also detects breathing movements coming from the side, so even in this case there is no need to worry about insufficient sensing. 
Can be used with all types of mattresses.
The Baby Control Digital Breath Monitor sensor pad is placed directly on the crib and can be safely used on all mattresses without material and thickness restrictions.
Digitally adjustable detection threshold.
With a few presses of the button, it is possible to set the threshold level of detection of the child's respiratory movements, which best suits the environment.
Digital display of respiratory intensity.
On the display, easily visible even in the dark (illuminated), it is possible to monitor the intensity of the baby's breathing movements on a scale of 0-9. Thus, it is possible to find out at a glance whether the Baby Control Digital breathing monitor is properly set for the baby's breathing.
Event memory.
The Baby Control Digital breath monitor can replay the events of the last nine minutes in one-minute increments. In real time, playback of recorded events from digital memory can provide important information about the circumstances of possible respiratory arrest.
Double (safety) siren.
The Baby Control Digital breathing monitor is equipped with a double safety siren. Battery voltage monitoring. In the case of low battery voltage, the Baby Control Digital breath monitor will notify you to replace the battery when it is turned on.
Two-year immediate exchange guarantee.
In case of any problems, we will replace the Baby Control Digital Breath Monitor immediately.

Specifications:
-Certification CE 1011 II.b
-Certificate number EMKI 5–738–200–1308 of the Baby Control Digital breath monitor
- Control unit BC-210
-Power supply 3V, 2 × 1,5V AA alkaline batteries
-Dimensions 155 × 90 × 37 mm
-Weight of the pad 155 g
- Sensing unit BC-210
-Recommended child weight min. 2 kg up to max. 20 kg
-The weight of the monitor is 750 g
- Number of pads 2 pcs